IF THE PRODUCT YOU ARE LOOKING FOR IS NOT LISTED BELOW, PLEASE CHECK OUR ACCESSORIES PAGE
![](/image?filename=Products/Gas%20Parts/302110B.jpg&width=300&height=0)
200K BTU regulator with Brass POL fitting (for use with 100 lb. propane tanks)
![](/image?filename=Products/Gas%20Parts/302110LL.jpg&width=300&height=0)
200K BTU regulator with 200K BTU rated bright green quick connect coupler (QCC). Legally MUST be used with tanks under 100 lbs.
![](/image?filename=Products/Gas%20Parts/302105-25.jpg&width=300&height=0)
Pack of 25 Black "O" Rings for POL Connector End.
![](/image?filename=Products/Gas%20Parts/302107.jpg&width=300&height=0)
Brass POL (for use with 100 lb. propane tanks)
![](/image?filename=Products/Gas%20Parts/302102LL.jpg&width=300&height=0)
200K BTU rated bright green quick connect coupler (QCC)
![](/image?filename=Products/Gas%20Parts/302120A.jpg&width=300&height=0)
6' high pressure hose with low pressure fittings
![](/image?filename=Products/Gas%20Parts/302123A.jpg&width=300&height=0)
10' high pressure hose with low pressure fittings
![](/image?filename=Products/Gas%20Parts/302124A.jpg&width=300&height=0)
12' high pressure hose with low pressure fittings
![](/image?filename=Products/Gas%20Parts/302127A.jpg&width=300&height=0)
15' high pressure hose with low pressure fittings
![](/image?filename=Products/Gas%20Parts/Griddle%20Parts/340px%20-%20302767-2.jpg&width=300&height=0)
120-CB Brass adapter needed to use any hose.
![](/image?filename=Image%20Coming%20Soon.jpg&width=300&height=0)
Manifold for all gas griddles. Does not include valves
![](/image?filename=Products/Gas%20Parts/Griddle%20Parts/340px%20-302763A.jpg&width=300&height=0)
Press-on cast iron air mixer with pin (2013 - Current)
![](/image?filename=Products/Gas%20Parts/Steam%20Table%20Parts/340px%20-302263.jpg&width=300&height=0)
Threaded cast iron air mixer for burner. Used on griddles built up to 2013 and all steam tables.
![](/image?filename=Products/Gas%20Parts/Griddle%20Parts/302752.jpg&width=300&height=0)
52" Triple burner assembly made from stainless steel. Used with press-on air mixers.
![](/image?filename=Products/Gas%20Parts/Griddle%20Parts/302753.jpg&width=300&height=0)
36" Triple burner assembly made from stainless steel. Used with press-on air mixers.
![](/image?filename=Products/Gas%20Parts/Griddle%20Parts/302761B.png&width=300&height=0)
New Look - Replacement Part for 302761A (Below)! Push to Turn Control Valve with propane gas orifice. Chrome knob sold separately.
![](/image?filename=Products/Gas%20Parts/Griddle%20Parts/302761A.jpg&width=300&height=0)
Old Valve No Longer Sold - See Part # 302761B (Above).
![](/image?filename=Products/Gas%20Parts/Griddle%20Parts/340px%20-302262.jpg&width=300&height=0)
Chrome knob for the push-to-turn control valve. Valve not included.
![](/image?filename=Products/Gas%20Parts/Griddle%20Parts/302758L.jpg&width=300&height=0)
Left-Side drip tray holder with black powder coat finish
![](/image?filename=Products/Gas%20Parts/Griddle%20Parts/302758R.jpg&width=300&height=0)
Right-side drip tray holder with black powder coat finish
![](/image?filename=Products/Gas%20Parts/Griddle%20Parts/302764%20Thumb.jpg&width=300&height=0)
1/6 Stainless steel drip tray. (Dimensions: 7"L x 6 1/4"W x 2 1/2"H)
![](/image?filename=Products/Gas%20Parts/102348.jpg&width=300&height=0)
4" x 1.25" solid rubber, heavy-duty swivel caster with 3/4" threaded stem, locking mechanism, and 200 lb. carrying capacity
![](/image?filename=Products/Gas%20Parts/302267.jpg&width=300&height=0)
8" Heavy-duty black wheel with 1/2" bore for bolt. (bolt not included)
![](/image?filename=Products/Gas%20Parts/800172.jpg&width=300&height=0)
Steel bolt for 8" black wheel
![](/image?filename=Products/Gas%20Parts/800173.jpg&width=300&height=0)
Nut for steel bolt on 8" wheel
![](/image?filename=Products/CHARCOAL%20PARTS/102344%20Thumb.jpg&width=300&height=0)
Big John’s exclusive flat wrench designed specifically for tightening our 4” & 5” casters.