IF THE PRODUCT YOU ARE LOOKING FOR IS NOT LISTED BELOW, PLEASE CHECK OUR ACCESSORIES PAGE
200K BTU regulator with Brass POL fitting (for use with 100 lb. propane tanks)
200K BTU regulator with 200K BTU rated bright green quick connect coupler (QCC). Legally MUST be used with tanks under 100 lbs.
Pack of 25 Black "O" Rings for POL Connector End.
Brass POL (for use with 100 lb. propane tanks)
200K BTU rated bright green quick connect coupler (QCC)
6' high pressure hose with low pressure fittings
10' high pressure hose with low pressure fittings
12' high pressure hose with low pressure fittings
15' high pressure hose with low pressure fittings
11 lb. Solid cast iron cooking grate. 16 1/4" x 16 1/8"
11 lb. Solid stainless steel cooking grate. 16 1/4" x 16 1/8"
Genuine Colorado lava rock. 7 lbs. in weight and ships via UPS. One bag of Lava Rock covers 1 section of an A-Series Gas Grill. A 210-28 NGLR or LPLR requires 2 bags. A 210-40 NGLR or LPLR requires 3 bags.
Our burner tube just got better - Stainless Steel, Smaller Holes, and New Hole Pattern. Now has press-in venturi air mixer for better temperature control, even/efficient burning, and eliminates flame inside the burner.
Brass control valve includes black knob and propane gas orifice
Propane gas orifice for control valve assembly
Brass control valve includes black knob and natural gas orifice
Natural gas orifice for control valve assembly
Threaded black knob for control valve assembly
Burner insert pan with 1 straight edge and 1 bent edge. Holds 2 burner tubes and 7 lbs. of lava rock
Burner insert pan with 2 straight edges. Holds 2 burner tubes and 7 lbs. of lava rock.
Cap covers burner insert pan edges. NOT TO BE USED OVER BURNER TUBES!
17.5"L x 14.75"W x 3/8"H. Made from stainless steel and fits neatly under each individual section on an A-series grill to collect drippings.
Set of 4 locks to hold drip trays in place during transportation.
6' Pipe manifold with 8 threaded slots for control valve assemblies. Includes elbow and pipe cap.
6' Stainless steel front work shelf
4" x 1.25" solid rubber, heavy-duty swivel caster with 3/4" threaded stem, locking mechanism, and 200 lb. carrying capacity
4" solid rubber, heavy-duty swivel caster with 3/4" threaded stem and 125 lb. carrying capacity.
NEW Caster Socket for Country Club Gas Grills - Standard on Country Club Grills as of July 2019. The difference is this is a taller coupler with straight thread (old-style had tapered thread). It is marked with machined notches around the exterior — welding required to replace. Purchase 2 if replacing on grill purchased before July 2019.
8" Heavy-duty black wheel with 1/2" bore for bolt. (bolt not included)
Steel bolt for 8" black wheel
Nut for steel bolt on 8" wheel
Big John’s exclusive flat wrench designed specifically for tightening our 4” & 5” casters.